• Easy to apply, provides excellent adhesion.
• Decorative appearance with a uniform finish.
• Corrects uneven surfaces caused by improper insulation system application.
• Water- and frost-resistant.
• Durable against external effects, protecting the structure for many years.
• Vapor-permeable, allowing the surface to breathe.
• Can be painted with exterior paints.
• Fine-grain texture reduces material consumption.

a) Surface Preparation:
Apply 303 Minarex Plaster – Grain and Linear Texture at least 12 hours after priming surfaces that have been coated with thermal insulation board plaster or insulation board plaster mortar and insulation system primer.

b) Product Preparation:
For 25 kg of 303 Minarex Plaster, Mineral Textured – White (Fine-Coarse), add approximately 6–6.5 liters of clean water and mix thoroughly, preferably with a low-speed mixer, until a lump-free consistency is achieved. Allow the prepared mortar to rest for 5 minutes, then remix for 1–2 minutes before use. The mixture should be consumed within 1.5–2 hours.

c) Application Method:
Apply the material with a steel trowel, spreading it evenly across the entire surface. Adjust the application thickness according to the largest aggregate. Within 10 minutes, while the material is still wet, use a plastic trowel in circular motions to create the desired texture. After application, if temperatures are high, moisten the surface until the cement sets.